嵌入式开发者社区

标题: 求高手：制作SD启动卡，开机卡在触摸屏矫正 [打印本页]

作者: 今朝有酒 时间: 2016-6-5 19:47
标题: 求高手：制作SD启动卡，开机卡在触摸屏矫正
我用的是am4379的板子，制作了一张SD启动卡，开机卡在触摸屏矫正，点击触摸屏没反应，一直卡在这里，求高手指点。
串口最后的信息如下：
Starting system message bus: dbus.
UIM SYSFS Node Found at /sys/./devices/kim/install
Starting uim-sysfs daemon.
uim

main
uim:install = /sys/./devices/kim/install
uim:dev_name = /sys/./devices/kim/dev_name
uim:baud_rate = /sys/./devices/kim/baud_rate
uim:flow_cntrl = /sys/./devices/kim/flow_cntrl
uim:begin polling...
Starting Dropbear SSH server: dropbear.
Starting telnet daemon.
Starting rpcbind daemon...rpcbind: cannot create socket for udp6
rpcbind: cannot create socket for tcp6
done.
creating NFS state directory: done
starting statd: done
Starting syslogd/klogd: done
Starting thttpd.
ioctl FBIOPUT_VSCREENINFO: Invalid argument
Starting PVR
find: /lib/modules/3.14.43: No such file or directory
insmod: ERROR: missing filename.
Could not find pvrsrvkm driver
Starting Lighttpd Web Server: lighttpd.
2015-09-15 08:35:11: (/home/teddy/tl437x/openembedded/tisdk/build/arago-tmp-external-linaro-toolchain/work/cortexa9t2hf-vfp-neon-linux-gnueabi/lighttpd/1.4.33-r1/lighttpd-1.4.33/src/log.c.166) server started
Calibrating touchscreen (first time only)xres = 800, yres = 480

Calibrating touchscreen (first time only)xres = 800, yres = 4802015-09-15 08:35:11: (/home/teddy/tl437x/openembedded/tisdk/build/arago-tmp-external-linaro-toolchain/work/cortexa9t2hf-vfp-neon-linux-gnueabi/lighttpd/1.4.33-r1/lighttpd-1.4.33/src/log.c.166) server startedStarting Lighttpd Web Server: lighttpd.Could not find pvrsrvkm driverinsmod: ERROR: missing filename.find: /lib/modules/3.14.43: No such file or directoryStarting PVRioctl FBIOPUT_VSCREENINFO: Invalid argumentStarting thttpd.Starting syslogd/klogd: donestarting statd: donecreating NFS state directory: donedone.rpcbind: cannot create socket for tcp6Starting rpcbind daemon...rpcbind: cannot create socket for udp6Starting telnet daemon.Starting Dropbear SSH server: dropbear.uim:begin polling...uim:flow_cntrl = /sys/./devices/kim/flow_cntrluim:baud_rate = /sys/./devices/kim/baud_rateuim:dev_name = /sys/./devices/kim/dev_nameuim:install = /sys/./devices/kim/installuim

mainStarting uim-sysfs daemon.UIM SYSFS Node Found at /sys/./devices/kim/installStarting system message bus: dbus.

作者: Jin 时间: 2016-6-6 09:13
你好，这个是文件系统的问题，我们有最新的文件系统，你可以联系创龙的技术支持索取support@tronlong.com

作者: 今朝有酒 时间: 2016-6-8 20:21
Thanks,现在触摸屏已经有反应了，多谢

欢迎光临嵌入式开发者社区 (https://51ele.net/)