动态配置PL设备树问题

ejg

[img]file:///C:/Users/win/AppData/Roaming/Tencent/Users/1207842219/QQ/WinTemp/RichOle/)J%7B5_X8]_2U[)[%25V1N1BB]N.png[/img]root@Zynq-Tronlong:~# echo -n "pl.dtbo" > /configfs/device-tree/overlays/full/path
[  424.429177] fpga_manager fpga0: writing system_wrapper.bin to Xilinx Zynq FPGA Manager
[  424.449816] fpga_manager fpga0: Found swapped sync word
root@Zynq-Tronlong:~#
如上，在动态加载PL设备树时，只有配置bin文件过程，没有显示注册设备成功。
设备树文件如下，为自动生成的dtsi文件。请问原因是什么
/dts-v1/;
/plugin/;
/ {
fragment@0 {
  target = <&fpga_full>;
  overlay0: __overlay__ {
   #address-cells = <1>;
   #size-cells = <1>;
   firmware-name = "system_wrapper.bin";
  };
};
fragment@1 {
  target = <&amba>;
  overlay1: __overlay__ {
   pt_carip_0: pt_carip@43c00000 {
    compatible = "xlnx,pt-carip-1.0";
    reg = <0x43c00000 0x10000>;
    xlnx,m00-axi-addr-width = <0x20>;
    xlnx,m00-axi-aruser-width = <0x0>;
    xlnx,m00-axi-awuser-width = <0x0>;
    xlnx,m00-axi-burst-len = <0x10>;
    xlnx,m00-axi-buser-width = <0x0>;
    xlnx,m00-axi-data-width = <0x20>;
    xlnx,m00-axi-id-width = <0x1>;
    xlnx,m00-axi-ruser-width = <0x0>;
    xlnx,m00-axi-target-slave-base-addr = <0x20000000>;
    xlnx,m00-axi-wuser-width = <0x0>;
    xlnx,s00-axi-addr-width = <0x4>;
    xlnx,s00-axi-data-width = <0x20>;
   };
  };

};

};

human

你想要实现的功能是什么？

明月松间照

感谢楼主分享