|
斌总,最近在用PRU_C做一个数据接收,,但用PRU_C里的例程是,load .out文件后就出现下面的错误是怎回事?PRU得使用单独的GEL文件?
C674X_0: Trouble Writing Memory Block at 0x0 on Page 0 of Length 0x604: (Error -1190 @ 0x0) Unable to access device memory. Verify that the memory address is in valid memory. If error persists, confirm configuration, power-cycle board, and/or try more reliable JTAG settings (e.g. lower TCLK). (Emulation package 7.0.48.0)
C674X_0: File Loader: Verification failed: Target failed to write 0x00000000
C674X_0: GEL: File: E:\Demo\PRU_C\LED\Debug\LED.out: Load failed.
|
本帖子中包含更多资源
您需要 登录 才可以下载或查看,没有帐号?立即注册
x
|